Contact Us
Request more
information
Mecc.Al specializes in the design and production of heat sinks and mechanical supports for the electronics industry.
Brazed and bonded fins heat sink
AIR-COOLED HEAT SINKS
Brazed and bonded fins heat sink
Product lines obtained by assembling extruded or laminated heat sink base and fins using a brazing or bonding process.
They offer good thermal performance and dimensional flexibility, using different alloys depending on the requirements of the project itself and without having to comply with the classic constraints of extruded profiles.
| TECHNICAL DATA | |
|---|---|
| Heatsink Width (W) | max 1000 mm (single piece, without welding) |
| Heatsink Length (L) | max 1000 mm |
| Base Thickness | 8÷35 mm |
| Fin Height (FH) | max 150 mm |
| Fin Distance (FD) | min 2 mm |
| Aspect Ratio (FH/FD) | max 75:1 |
| Tolerances on dimensions and machining | ISO 2768-mK |
| Material Brazed fins heat sink | EN AW-1050A - EN AW-6060 - EN AW-6101B |
| Material Bonded fins heat sink | EN AW-1050A - EN AW-6060 - EN AW-6101B - EN AW-6082 - Copper |
ATTENTION: Indicative values, dimensions may vary depending on configuration